Dr. Thrinadh Jadam
Qualification : Ph.D. (NIT, Rourkela)
Designation : Asst. Professor
Details of Educational Qualification:
| Course | Specialization | Group | College Name/University | Year of Passing |
|---|---|---|---|---|
| Ph.D. | Mechanical | Mechanical | National Institute of Technology (NIT), Rourkela | 2021 |
| M.Tech. | Production Engineering | Production Engineering | National Institute of Technology (NIT), Rourkela | 2017 |
| B.Tech. | Mechanical | Mechanical | RVR & JC College of Engineering, ANU | 2013 |
List of Publications
| S.No | Title of the Paper | Full Details of Journal Name / Conference Name, Volume number, page number, Date |
|---|---|---|
| 1 | Study of Surface Integrity and Machining Performance during Main/Rough cut and Trim/Finish Cut Mode of WEDM on Ti-6Al-4V: Effects of Wire Material, | Journal of the Brazilian Society of Mechanical Sciences and Engineering, 41(3), 151, Springer. DOI: 10.1007/s40430-019-1656-4 |
| 2 | Machinability of Ti-5Al-2.5Sn for Electro-Discharge Machining: An Experimental Investigation, | Sadhana-Academy Proceedings in Engineering Sciences, 45(1), 1-26, Springer |
| 3 | Studies on Chip Morphology and Modes of Tool Wear during Machining of Ti-6Al-4V using Uncoated Carbide Tool: Application of Multi- Walled Carbon Nano Tubes Added Rice Bran Oil as Nanocutting Fluid, | Machining Science and Technology, an International Journal, 1-51, Taylor and Francis Group. DOI: 10.1080/10910344.2020.1815040. |
| 4 | Influence of cutting tool material on machinability of Inconel 718 superalloy, | Machining Science and Technology, an International Journal, 1-49, Taylor and Francis Group. DOI: 10.1080/10910344.2020.1815047 |
| 5 | EDM Performance of Inconel 718 Super Alloy: Application of Multi-Walled Carbon Nanotube (MWCNT) Added Dielectric Media, | Journal of the Brazilian Society of Mechanical Sciences and Engineering, 41(8), 305, Springer. DOI: 10.1007/s40430-019-1813-9 |
| 6 | Electro-Discharge Machining (EDM) of Super Alloy Inconel 718 using Triangular Cross Sectioned Copper Tool Electrode: Emphasis on Topography and Metallurgical Characteristics of the EDMed Work Surface, | Proceedings of the National Academy of Sciences, India Section A: Physical Sciences, 1- 12, Springer. DOI: 10.1007/s40010-019-00642-3 |
| 7 | Effects of Machining Duration on Machinability of Ti-6Al-4V Superalloy using Uncoated Carbide Tool: Performance of Dry Cutting and Nanofluid MQL (MWCNT Added Rice Bran Oil), | Arabian Journal for Science and Engineering, 1-23, Springer. DOI: 10.1007/s13369-020-04516-4 |
| 8 | Powder Mixed Electro-Discharge Machining Performance of Inconel 718: Effect of Concentration of Multi- Walled Carbon Nanotube Added to the Dielectric Media, | Sãdhanã-Academy Proceedings in Engineering Sciences 45(1), Springer. DOI: 10.1007/s12046-020-01378-2 |
| 9 | Parametric Effects on EDM Performance of Nimonic 80A, | Arabian Journal for Science and Engineering, 44(12): 10155–10167, Springer. DOI:10.1007/s13369-019-04112-1 |
| 10 | Effect of using SiC Power Added Dielectric Media during Electro-Discharge Machining of Inconel 718 Super Alloys, | Journal of the Brazilian Society of Mechanical Sciences and Engineering, 40(7), 330, Springer. DOI: 10.1007/s40430-018-1257-7 |
| 11 | Electro-Discharge Machining of Inconel 718 Using Square Cross Sectioned Copper Tool Electrode: Studies on Topography and Metallurgical Features of the EDMed Work Surface, | Materials Today: Proceedings, 5 (2018) 4847–4854. |
| 12 | Application of SiC Power Added in Kerosene Dielectric Media for Electro-Discharge Machining of Inconel 718 Super Alloys: Effects of Powder Concentration, | Materials Today: Proceedings, 5(9) Part 3: 20297–20305. |
| 13 | Effects of Addition of Copper Powder in the Dielectric Media (EDM Oil) on Performance of Electro-Discharge Machining of Inconel 718 Super Alloys, | Materials Today: Proceedings, 5(9) Part 3: 17618–17626. |
| 14 | Assessment of surface integrity during electrical discharge machining of titanium grade 5 alloys (Ti-6Al-4V), | Materials Today: Proceedings, 18(Part 7): 2477–2485. |
| 15 | Performance of dielectric media (conventional EDM oil and distilled water) during machining of Inconel 825 super alloy, | Materials Today: Proceedings, 18(Part 7): 2679–2687. |
| 16 | Machining Behavior of Inconel 718 Superalloy: Effects of Cutting Speed and Depth of Cut, | Materials Today: Proceedings. (Published online) https://doi.org/10.1016/j.matpr.2019.10.128 |
| 17 | Analysis on Topography and Metallurgical Aspects of EDMed Work Surface of Inconel 718 Obtained Using Triangular Cross Sectioned Copper Tool Electrode, | IEEE International Conference on Management Systems (AMIAMS-2017) during 3-5 February, 2017, organized by Department of Mechanical Engineering, Motilal Nehru National Institute of Technology, Allahabad, UP- 211004. |
| 18 | Electro-Discharge Machining of Inconel 718 Using Square Cross Sectioned Copper Tool Electrode: Studies on Topography and Metallurgical Features of the EDMed Work Surface, | 7th International Conference on Materials Processing and Characterization, 17-19 March 2017, GRIET, Hyderabad. (ID No 1110) |
| 19 | Characteristics of EDMED work surfaces of 304SS, Inconel 601 and Titanium alloy Ti-6Al-4V, | 1st International Conference on Mechanical Engineering (INCOM 2018), January 4-6, 2018, organized by Department of Mechanical Engineering, Jadavpur University, Kolkata 700032. |
| 20 | Application of SiC Power Added in Kerosene Dielectric Media for Electro-Discharge Machining of Inconel 718 Super Alloys: Effects of Powder Concentration, | International Conference on Materials Processing and Characterization (ICMPC 2018), organized by the Gokaraju Rangaraju Institute of Engineering and Technology, March 16-18, 2018, Hyderabad. |
| 21 | Effects of Addition of Copper Powder in the Dielectric Media (EDM Oil) on Performance of Electro-Discharge Machining of Inconel 718 Super Alloys, | International Conference on Materials Processing and Characterization (ICMPC 2018), organized by the Gokaraju Rangaraju Institute of Engineering and Technology, March 16-18, 2018, Hyderabad. |
| 22 | Assessment of surface integrity during electrical discharge machining of titanium grade 5 alloys (Ti-6Al- 4V), | 9th International Conference on Materials Processing and Characterization, 8-10 March 2019, GRIET, Hyderabad, Telangana 500090. |
| 23 | Performance of dielectric media (conventional EDM oil and distilled water) during machining of Inconel 825 super alloy, | 9th International Conference on Materials Processing and Characterization, 8-10 March 2019, GRIET, Hyderabad, Telangana 500090. |
| 24 | Machining Behavior of Inconel 718 Superalloy: Effects of Cutting Speed and Depth of Cut, | Proceedings of 10th International Conference on Materials Processing and Characterization, 21-23 February 2020, GLA University, Mathura- 28406(UP). |
| 25 | Wear morphology of microwave post-treated WC-Co tool during machining of Inconel 718 superalloy, | International Conference and Exposition on Mechanical, Material and Manufacturing Technology (ICE3MT2020), CVR College of Engineering, Hyderabad, during June 12-13, 2020. Materials Today: Proceedings, 38, 2133-2139. |
Book Chapters
- Thrinadh Jadam, Deepankar Panda, Suman Chatterjee, Saurav Datta, Santosh Kumar Sahoo, Subash Chandra Mishra, Performance of Microwave Irradiated WC-Co Insert during Dry Machining of Inconel 718 Superalloys, Book Chapter in: Sustainable Manufacturing and Design, (pp. 103-132). Woodhead Publishing.