Dr. Kamlesh Kumar
Qualification : Ph.D. (NIT, Rourkela)
Details of Educational Qualification:
| Course | Specialization | Group | College Name/University | Year of Passing |
|---|---|---|---|---|
| Ph.D. | Mechanical engineering | Mechanical Engineering | National Institute of Technology, Rourkela | 2020 |
| B.Tech. | Mechanical Engineering | Mechanical Engineering | Institute of Technical Education & Research, Bhubaneswar | 2013 |
My Publications
| S.No | Title of the Paper | Full Details of Journal Name / Conference Name, Volume number, page number, Date |
|---|---|---|
| 1 | A review on TIG welding technology variants and its effect on weld geometry | Materials Today: Proceedings https://doi.org/10.1016/j.matpr.2021.07.308 |
| 2 | Investigation on the Stress Distribution During Hard Turning of AISI 52100 Steel Using Al2O3/TiCN Cutting Tool Coated with Mono-layered AlCrN and Multi-layered AlTiN/TiN Coating | Processing and Characterization of Materials,Springer Proceedings in Materials 13 (2021), 263-270, https://doi.org/10.1007/978-981-16-3937-1_27 |
| 3 | Pulse laser welding of high carbon alloy steel: assessment of melt pool geometry and mechanical performance | Sådhanå (2021) [SCI, IF = 0.849], ISSN: No: 46:13, https://doi.org/10.1007/s12046-020-01528-6 |
| 4 | Microstructure evolution and metallurgical characteristic of bead-on-plate TIG welding of Ti-6Al-4V alloy | Journal of Materials Processing Tech. 265 (2019) pp 34–43. https://doi.org/10.1016/j.jmatprotec.2018.10.002. [SCI, IF = 4.178] |
| 5 | Sliding abrasive wear characteristic of TIG cladded TiC reinforced Inconel825 composite coating | International Journal of Refractory Metals and Hard Materials (2017). DOI:10.1016/j.ijrmhm.2017.08.005. (SCI, IF = 2.155). |
| 6 | Effect of overlapping condition on large area NiTi layer deposited on Ti-6Al-4V alloy by TIG cladding technique | Surface and Coatings Technology, https://doi.org/10.1016/j.surfcoat.2020.125417. [SCI, IF = 3.192] |
| 7 | Effect of Varying Root Gap on Butt Welding of 6 mm Thick AISI 1020 Plate by Autogenous TIG Welding Process | Materials Science Forum 880 (2016) pp 21-24, https://doi.org/10.4028/www.scientific.net/MSF.880.21 |
| 8 | Influence of welding current on the mechanical property of 3 mm thick commercial 1050 aluminium butt joint weld by AC-TIG welding method | Materials Today: Proceedings 5 (2018) pp 24141–24146. https://doi.org/10.1016/j.matpr.2018.10.208 |
| 9 | Effect of activated flux on TIG welding of 304 austenitic stainless steel | Materials Today: Proceedings 18 (2019) PP. 4792–4798, https://doi.org/10.1016/j.matpr.2019.07.467 |