Dr. C. Yuvaraj
Qualification : Ph.D. (Bangalore University)
Designation : Professor & Principal
Details of Educational Qualification:
| Course | Specialization | Group | College Name/University | Year of Passing |
|---|---|---|---|---|
| Ph.D. | Metal Matrix Composites | Mechanical Engineering | Bangalore University | 2009 |
| M.E. | Manufacturing Science and Engineering | Mechanical Engineering | University Visveswaraiah College of Engineering, Bangalore University, Bangalore. | 2000 |
| M.B.A | Human Resource Management | Management | S. K. University, Anantapur | 2013 |
| B.E. | Mechanical Engineering | Mechanical Engineering | M S Ramaiah Institute of Technology, Bangalore University, Bangalore. | 1991 |
Research Projects
| S.No | Name of the Faculty | Title of the Project | Sanctioning Authority | Sanctioned Amount | Duration of the Project |
|---|---|---|---|---|---|
| 1 | Dr. I. Arun & Dr. C. Yuvaraj | Investigation and characterization of Electrical Discharge Coated (EDC) alloys for mitigation of biological fouling on maritime structures. | DST-SERB | 38.37 Lakhs | 3 Years |
| 2 | Dr. C. Yuvaraj | Design and Fabrication of multi-Crop Smashing Combination Thresher | Institute of Engineers, Kolkata | 25,500 | 1 Year |
Research Guideship
| S.No | Scholar Name | Guide Name | Co-Guide from JNTUA College of Engineering, Anantapur | Date of Admission | Area of Research |
|---|---|---|---|---|---|
| 1 | T. Siva Prasad | Dr. C. Yuvaraj | Dr. K. Prahlada Rao Principal, JNTUA College of Engineering, Ananthapuramu |
2015-16 | Composite Materials |
My Publications
| S.No | Title of the Paper | Full Details of Journal Name / Conference Name, Volume number, page number, Date |
|---|---|---|
| 1 | Analysis and Optimization of Metal Injection Molding Feedstock SS 316L for Rheological Properties | Journal of The Institution of Engineers (India): Series D, pp.1-8, 2018. |
| 2 | Investigation of Mechanical Properties of a Composite Tubular Electrode Based Hard coating on Mild Steel Substrate | International Journal of Advanced Research Foundation, Volume 4, Issue 3, March 2017 |
| 3 | Metal Injection Molding – A Review | Manufacturing Technology Today Journal, Vol. 15, Issue No. 12,2017 |
| 4 | Structural Analysis and Fabrication of femoral component of Cemented Hip implant through Fused Deposition Modeling. | International Journal of Engineering Sciences and Research Technology, 72-80, 2016. |
| 5 | Application of Taguchi Method for Optimizing the Parameters of Thermal Properties of Al/SiC-Gr Hybrid Composites | Bonfring International Journal of Advances in Image Processing, Vol. 6, No. 4, 2016. |
| 6 | Fabrication of cast aluminium-silicon (Al-Si) and aluminium -Magnesium (Al-Mg) alloys and their properties | Acta Metallurgica Slovaca, Vol 22, No.4, pp. 212-221, 2016. |
| 7 | Design, Analysis, Fabrication and Testing of CFRP with CNF Composite Cylinder for Space Applications | International Journal of Composite Materials, Vol.5, No.5, pp.102-128, 2015. |
| 8 | Experimental Characterization of Carbon Fibre T700 / Epoxy towpreg for Space Applications | International Journal of Engineering Research and Applications, Vol.5, No.12, pp.1-14, 2015. |
| 9 | Optimisation Of Welding Process Of Composite Chromium-Carbide Based Tubular Electrode For Hardfacing | International Journal of Mechanical and Production Engineering Research and Development, Vol.4, No.1, pp. 39-46, 2014. |
| 10 | Effect of Nickel Content on Microstructure of Modified Zinc aluminium Cast Alloys | International Journal of Technical Research and Applications, Vol.2, No.4, pp.81-83, 2014. |
| 11 | Design and analysis of a single seater race car chassis frame | International Journal of Research Aeronautical and Mechanical Engineering, Vol.2, No.8, pp.12-23, 2014. |
| 12 | Evaluation of Mechanical Properties of Al/SiC-Graphite Hybrid Metal Matrix Composites | International Journal of Advanced Trends in Computer Science and Engineering, Vol.2, No.6, pp. 286-289, 2013. |
| 13 | Microstructural and Mechanical Behaviour of Zinc-Aluminium Cast Alloys | International Journal of Mechanical Engineering and Technology (IJMET), Vol.4, No.4, pp. 243 – 248, 2013. |
| 14 | Characterization of Machinability Behaviour of Al/Al2O3 MMCs | International Journal of Advanced Engineering Research and Studies, Vol.1, No.2, pp. 114-117, 2012. |
| 15 | Neural network for prediction of EDM of Al/SiC-graphite particulate reinforced hybrid composites | Int J Emerg Technol Adv Eng, Vol.2, No.12, pp. 730-739, 2012. |
| 16 | Effect of Thermal Fatigue Behaviour on Bending Strength of Al/Al 2 O 3 MMCs. | International Journal of Applied Engineering Research, Vol.5, No.7, 2010. |
| 17 | Effect of Drilling Parameters on Drillability Behaviour of Al/Al 2 O 3 MMCs. | International Journal of Applied Engineering Research, Vol.5, No.7, 2010. |
| 18 | Study on Transition Behaviour of Al/Al2O3 MMCs | World Journal of Engineering, Vol.5, No.4, pp. 543-544, 2008. |
| 19 | Optimization of machinability parameters of aluminium/alumina metal matrix composites | International Journal of Applied Engineering Research, Vol.3, No.9, pp.1197-1204, 2008. |
| 20 | A study of transition wear behaviour of alumina particle reinforced Al-6061 MMCs | Journal of Reinforced Plastics and Composites, Vol.28, No.23, pp. 2903-2909, 2009. |
Conferences & Workshops attended
- Participated in “Academia Day-Part of “3Dverve 2019”- An Annual Technical Conference of Dassault Systemes Foundation and Dassault Systemes” at Dassault Systemes, India R&D (Auditorium), Hinjewadi Phase 1, Pune on 21 February 2019.
- One Day workshop on Creating Roadmap for Innovation and Incubation Centres in AP Educational Institutions, organized by ITE&C department on 19-10-2016 at Gateway Hotel in Vijayawada.
- A workshop on “Quality Initiatives in Technical & Higher Educational Institutions (in compliance with NBA & NAAC Accreditation)” organized by Engineering Staff College of India (ESCI), Hyderabad, from 07-09-16 to 9-09-16.
- 3rd International Conference in Transformations in Engineering Education (ICTIEE 2016) was organized by IUCEE (Indo-US Collaboration for Engineering Education) and College of Engineering, Pune (COEP) during 08-12 January 2016.
- An Orientation Session on “Siemens Centres of Excellence (COE) Clusters in AP” organized by Andhra Pradesh State Skill Development Corporation at the Sri City Business Centre, Sri City on 27th August 2015.
- A one-day workshop on “Awareness on Various programs for Foreign University Collaborations” was Organized at JNTUA, Ananthapuramu on 16th May 2015.
- A meet in Chennai conducted by Higher Education Forum, South Zone to receive Campus Preparedness Award 2015 on 26th March 2015.
- International conference in Transformations in Engineering Education (ICTIEE 2015). It is a four day International conference, among these first two days were pre-conference workshops conducted by the BMS College of Engineering, Bangalore and collaborating with Indo-US collaboration for Engineering Education (IUCEE) during 5-8 January 2015.
- A workshop on TEQIP-II : Good Governance, Leadership and Management on 14th - 15th October 2014 at Metropolitan Hotel, Near Bangla Sahib Gurudwara Road, New Delhi.
- Represented the college for the workshop on Procurement Practices attended on 22.08.2014, at PSG Institute of Technology, organized by PSG, SPFU-TN and NPIU at Coimbatore.
- A National Conference on “Leadership in Higher Education” held on July 4, 2014 at Engineering staff college of India (ESCI), Hyderabad.
- A one day workshop on “Academia Industry Management For creating Sustainable Employability” held on 06-04-2014 Organized by GP Birla Institute of Human Excellence, Birla Center, Hyderabad.
- Participated in a Seminar on “Innovative Teaching, Research Learning & Accreditation Practices” (IE-ITR SESSION) organized by ESCI as the constituent part of IE(I) Congress-2013 on 21 December, 2013 at Hotel Leela Palace, Chennai.
- Appointed as the co ordinator of the program by AICTE and received a grant from AICTE to conduct 2 Weeks FDP On Fatigue & Fracture Mechanics In FE Analysis.
- A Two Day Workshop on “Recent Trends In Manufacturing “ Under TEQIP-II Organised by the Department of Mechanical Engineering, Chaitanya Bharathi Institute of Technology, Gandipet, Hyderabad on 29-30 July 2013.
- A Two Day Workshop on “Procurement Guidelines & PMSS Training" under TEQIP-II conducted by NPIU - New Delhi and SPFU Andhra Pradesh at University College of engineering, Osmania University, Hyderabad on 16-17 May 2013.
- A One Day workshop (28 September,2012) on “ Metallurgy For Non-Metallurgists” (MNM-2012) organised by Indian Institute of Metals, Hyderabad Chapter on 28th September 2012.
- Appointed as Principal Investigator, for the project “DEVELOPMENT OF HIGH STRENGTH MATERIALS FOR Micro Air Vehicle STRUCTURES “.
- Participated in an interactive session with Dr. U. Chandrasekhar, Director, ESCI & Gp Capt B.S. Phillora, Head Management , Technology & Information Divisions, Engineering Staff College of India at Hyderabad on 14th December 2013.
List of Patents
| S.No | Name of the Applicant | Name of the Inventors | Department | Title of the Patent | App. No./Ref No. | Date of Filing | Date of Publishing | Status | MITS Affiliated |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Dr.C.Yuvaraj, Dr. G. Hemanth, Mr.A.Vasudeva Reddy, Dr.H.Mohit |
Dr.C.Yuvaraj, Dr. G. Hemanth, Mr.A.Vasudeva Reddy, Dr.H.Mohit |
ME | Removal Apparatus For Cylindrical Polymer Matrix Composite (Pmc) Parts Fabricated By Compression Cum Extruder Method | 201941027725 | 10/7/2019 | 2/8/2019 | Filed & Published | yes |
| 2 | Dr.C.Yuvaraj, Dr.G. Hemanth Kumar, Mr.S.Mohan Raj, Mr.H.Mohit | Dr.C.Yuvaraj, Dr.G. Hemanth Kumar, Mr.S.Mohan Raj, Mr.H.Mohit | ME | A Novel Hole Making Technique During The Thermoforming On Plastic Sheets | 2019410117448 | 02/05/2019 | 24/05/2019 | Filed & Published | yes |
| 3 | Dr. C. Yuvaraj, Dr. G. Hemanth Kumar, Mr. Harinandan Kumar, Dr. P. Sivaiah, Mr. Prabhu Jayaraman | Dr. C. Yuvaraj, Dr. G. Hemanth Kumar, Mr. Harinandan Kumar, Dr. P. Sivaiah, Mr. Prabhu Jayaraman | ME | New Invention of Low Cost Creep Testing Machine with Variable Temperature and Environmental and Environmental Conditions for Composite Material(pmmc) | 201741046532 | 26/12/2017 | 5/1/2018 | filed and published | yes |