Logo


Dr. T. V. V. L. N. Rao

Qualification : Ph.D.

Details of Educational Qualification:

Course Specialization Group College Name/University Year of Passing
Ph.D. Mechanical Engineering Mechanical Engineering Indian Institute of Technology, Delhi 2000
M.Tech. Mechanical Engineering Mechanical Engineering National Institute of Technology, Calicut 1994
B.Tech. Mechanical Engineering Mechanical Engineering Nagarjuna University, India 1991

My Publications

S.No Title of the Paper Full Details of Journal Name / Conference Name, Volume number, page number, Date
1“Tribological Performance of Low Viscosity Halogen-Free Ammonium Based Protic Ionic Liquids with Carboxylate anions as Neat Lubricants”, P(Virtual International Tribology Research Symposium scheduled on November 5th-7th, 2020), Tribology International, Volume 160, 2021, 107058.
2“Multiple-objective optimization of hydroxyapatite-added EDM technique for processing of 316L-steel”, PMaterials and Manufacturing Processes, 2021.
3“Recent Developments in Biotribology”, PCRC Press (Taylor & Francis), (Biotribology: Emerging Technologies and Applications, part of Emerging Materials and Technologies Series - Series Editor: Boris I. Kharissov), Oct 2021.
4“Future Outlooks in Biotribology”, PCRC Press (Taylor & Francis), (Biotribology: Emerging Technologies and Applications, part of Emerging Materials and Technologies Series - Series Editor: Boris I. Kharissov), Oct 2021.
5“Recent Developments in Green Tribology”,P CRC Press (Taylor & Francis), (Green Tribology: Emerging Technologies and Applications, Editors: T V V L N Rao, part of Emerging Materials and Technologies Series - Series Editor: Boris I. Kharissov), Oct 2021.
6“Future Outlooks in Green Tribology”,P CRC Press (Taylor & Francis), (Green Tribology: Emerging Technologies and Applications, part of Emerging Materials and Technologies Series - Series Editor: Boris I. Kharissov), Oct 2021.
7 “Assessment of PM-EDM cycle factors influence on machining responses and surface properties of biomaterials: A comprehensive review”, Precision Engineering, Vol. 66, 2020, pp. 531-549.
8 “Biocompatibility and corrosion resistance of metallic biomaterials: A review”, Corrosion Reviews, https://doi.org/10.1515/corrrev-2020-0001, 2020.
9 "Design and Optimization of Laminated Composite Plate for Maximum Fundamental Frequency", SAE Technical Paper, 2020-28-0502, 2020.
10 “Static and Stability Analysis of Partial Slip Texture Multi-lobe Journal Bearings” (Sixth World Tribology Congress (WTC 2017) in Beijing, China, September 17-22, 2017) iMechE, Part J: Journal of Engineering Tribology,2020, Vol. 234, Issue 4,pp. 567–587.
11 “Analysis of Magnetohydrodynamic Partial Slip Laser Bump Texture Slider and Journal Bearing” (6th Asia International Conference on Tribology, Kuching, Malaysia, 17-20 September 2018), Proceedings of the iMechE, Part J: Journal of Engineering Tribology, Vol. 233, Issue. 12, 2019,pp. 1921-1938.
12Experimental testing and thermal analysis of coupler-rocker ball bearing” Thermal Science, https://doi.org/10.2298/TSCI190126111J.
13 “In- vitro cytotoxicity and wear investigation of hydroxyapatite coating synthesized on Zr-based BMG by Electro Discharge process” Surface and Coatings Technology, Volume 370, 2019, pp. 213-226.
14 “Hydroxyapatite Mixed-Electro Discharge Deposition of Bioceramic Lakargiite (CaZrO3) on Metallic Glass for orthopedic application”Materials and Manufacturing Processes, 2018, Vol. 33, No. 16, 1734–1744.
15 “Partial Slip Texture Slider and Journal Bearing Lubricated with Newtonian fluids: A Review”, Journal of Tribology, 140(4), 2018, 040801-1-20.
16 “Novel halogen free hydrophobic trioctylammonium-based protic ionic liquids with carboxylate anions: Synthesis, characterization, and thermophysical properties”, Journal of Molecular Liquids,Vol. 242, 2017, pp. 349-356.
17 “Novel low viscosity ammonium- based ionic liquids with carboxylate anions: Synthesis, characterization, and thermophysical properties”, Journal of Molecular Liquids, Vol. 230, 2017, pp. 565–573.
18 “Stability Evaluation of Three-layered Journal Bearing with Slip/Partial Slip”, Industrial Lubrication and Tribology, Vol.69, No. 3, 2017, pp. 334-341.
19 “Meshless Local B- spline Collocation Method for Heat Conduction Problems with Spatially Non-homogeneous and Time Dependent Heat Sources” Journal of Heat Transfer, Vol. 139, No. 7, 2017, 071302-071302-11.
20 “Linear stability analysis of short journal bearing with an axial groove: Lineare Stabilitätsanalyse von Kurzgleitlagern mit einer axialen Nut ” (2nd International Conference on Mechanical, Manufacturing and ProcessPlant Engineering (ICMMPE 2016) at Kuala Lumpur, Malaysia, 23–24 November 2016), Materialwissenschaft und Werkstofftechnik (Material Science and Engineering Technology), Vol. 48, No. 3-4, 2017, pp. 210-217.
21 “Analysis of Micropolar and Power-law Fluid Lubricated Slider and Journal Bearing withPartial Slip – Partial Slip Texture Configuration” Tribology Transactions, Vol. 59, No. 5, 2016, pp 896-910.
22 “Analysis of Couple Stress Fluid Lubricated Partially Textured Slip Slider and Journal Bearing using Narrow Groove Theory”, Tribology International, Vol. 69, 2014, pp. 1-9.
23 “Analysis of Journal Bearing with Double- Layer Porous Lubricant Film: Influence of Surface Porous Layer Configuration”, Tribology Transactions, Vol. 56,No. 5, 2013, pp. 841-847.
24 “Stability Characteristics of Misaligned Journal Bearing,” Advances in Vibration Engineering (Journal of Vibration Engineering & Technologies), Vol. 11, No. 4, 2012, pp. 361-370.
25 “Analysis of Slider and Journal Bearing using Partially Textured Slip Surface”, Tribology International, Vol. 56, 2012, pp. 121-128.
26 “Stabilization of Journal Bearing using Two-layered Film Lubrication” Journal of Tribology, Vol. 134, No. 1, 2012, pp. 014504.
27 “Analysis of single-grooved slider and journal bearing with partial slip surface” Journal of Tribology, Vol. 132, No. 1, 2010, 014501.
28 “Theoretical prediction of journal bearing stability characteristics based on the extent of slip region on bearing surface” Tribology Transactions, Vol. 52, No. 6, 2009, pp. 750 – 758.
29 “Active Control of the Stability of Flexible Rotor Supported on Journal Bearings,” Advances in Vibration Engineering (Journal of Vibration Engineering & Technologies), Vol. 7, No. 3, 2008, pp. 275 – 281.
30 “Stability Analysis of a Rough Journal Bearing Considering Cavitation Effects” Vol. 127, 2005, Journal of Tribology, pp. 112-119.
31 “Stability Analysis of Floating Ball Bearing” (STLE 2004 Annual Meeting and Exhibition, May 17 – 20, 2004, Toronto), Tribology Transactions, Vol. 47, No. 4, pp. 543- 548.
32 “Transient Analysis of Hydrodynamic Grooved Journal Bearing,” (VETOMAC 2 – Vibration Engineering and Technology of Rotating Machinery, 16 – 18th December, 2002, BARC, Mumbai), Advances in Vibration Engineering (Journal of Vibration Engineering & Technologies), Vol. 3, No. 1, 2004, pp. 97-106.
33 “Stability Characteristics of Herringbone Grooved Journal Bearings Incorporating Cavitation Effects” (STLE/ASME International Tribology Conference 2003, October 26 –29, 2003, Florida), Journal of Tribology, Vol. 126, No.2, pp.281 – 287.
34 “Dynamic Coefficients Prediction in Multilobe Journal Bearings Using Mass Conservation Algorithm” (58th STLE Annual Meeting, April 28 – May 1, 2003, in New York), Tribology Transactions, Vol. 46, 2003, pp. 414 – 420.
35 “Linear Stability Analysis of a Hydrodynamic Journal Bearing Considering Cavitation Effects,” (57th STLE Annual Meeting, May 19 – 23, 2002, in Houston, Texas), Tribology Transactions, Vol. 45, pp. 450 -456.
36 “Nonlinear Prediction of Rotordynamic Coefficients for a hydrodynamic journal bearing,” (STLE Preprint No. 01-AM-16), Tribology Transactions, Vol. 44, 2001, pp. 367 – 374.
37 “A methodology for dynamic coefficients and nonlinear response of multi lobe journal bearings,” Tribology Transactions, Vol. 44, 2001, pp. 111 – 117.
38 “An analytical approach to evaluate dynamic coefficients and nonlinear analysis of a hydrodynamic journal bearing,” Tribology Transactions, Vol. 43, 2000, pp. 109-115.
39 “Rapid performance evaluation of journal bearings,” Tribology International, Vol. 30, No. 11, 1997, pp. 825-834.
40 “An Overview of Research on Biolubricants in Malaysia and Japan for Tribological Applications” (5th International Conference and Exhibition on Sustainable Energy and Advanced Materials (ICE-SEAM2017), in Melaka, Malaysia on 16-19 October 2017) Jurnal Tribologi, 2018,Vol. 18, pp.40-57.
41 “Stability Analysis of Double Porous and Surface Porous Layer Journal Bearing,” Tribology - Materials, Surfaces & Interfaces, 2016,Vol. 10, No. 1, 2016, pp 19-25.
42 “Cavitation Effects on the Stability of a Submerged Journal Bearing,” (IFToMM Sixth International Conference on Rotordynamics, September 30 – October 4, 2002, pp. 652 – 658, Sydney), International Journal of Rotating Machinery, Vol. 10, No. 3, 2004, pp. 227 – 232.
43 “A Nonlinear Model For Prediction Of The Dynamic Coefficients In A Hydrodynamic Journal Bearing,” (ISROMAC 9- DD-ABS-102, February 10-14, 2002, Honolulu, Hawaii), International Journal of Rotating Machinery, Vol. 10, No. 6, 2004, pp. 507 – 513.
44 “Limiting stiffness coefficients analysis of texture foil journal bearing”, (3rd International Conference on Advances in Mechanical Engineering, SRMIST, Kattankulathur, February 24 – 29, 2020), IOP Conf. Ser.: Mater. Sci. Eng. 912 022031, 2020.
45 “Mathematical simulation of vibration signature of ball bearing defect in a rotor bearing system”, (3rd International Conference on Advances in Mechanical Engineering, SRMIST, Kattankulathur, February 24 – 29, 2020), IOP Conf. Ser.: Mater. Sci. Eng. 912 022034, 2020.
46 “Estimation of critical speeds of cracked rotor supported on ball bearings”, (3rd International Conference on Advances in Mechanical Engineering, SRMIST, Kattankulathur, February 24 – 29, 2020), IOP Conf. Ser.: Mater. Sci. Eng. 912 022033, 2020.
47 “Investigation of Maximum Erosion Zone in the Horizontal 90° Elbow”, In: Emamian S., Awang M., Yusof F. (eds) Advances in Manufacturing Engineering. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978- 981-15-5753-8_21, 2020.
48 "Squeeze Film Analysis of Three- layered Parallel Plate and Partial Journal Bearing Lubricated with Couple Stress Fluids for Skeletal Joint Applications", (International conference on BioMaterials, BioEngineering, and BioTheranostics (BioMET 2018), Vellore, India, 24th -28th July 2018), Materials Today: Proceedings,Vol. 15, No.2, 2019,pp. 328- 335.
49 “Hydroxyapatite Electro Discharge Coating of Zr-based Bulk Metallic Glass for Potential Orthopedic Application” (4th International Conference on Mechanical, Manufacturing and Plant Engineering (ICMMPE 2018), Melaka, Malaysia, 14th – 15th November 2018), Key Engineering Materials, Vol. 796, pp. 123-128, 2019.
50 “Analysis of Piston-Cylinder Dashpot Damping Constant with Slip and Couple Stress Fluid” (TRIBOINDIA-2018, An International Conference on Tribology, VJTI, Mumbai, India, 13th–15thDecember 2018), Available at SSRN 3322412, 2018.
51 “Enhancing surface quality of Zr-Cu-Ni-Ti-Be through hydroxyapatite mixed EDM for potential orthopedic application”(6th International Conference on Production, Energy and Reliability 2018 (ICPER 2018) at Kuala Lumpur, Malaysia, 13 - 14 August 2018),AIP Conference Proceedings, 2018, 2035, 080010.
52 “Effect of back rake angle and shape on wear rate of PDC cutter in hard formation” (6th International Conference on Production, Energy and Reliability 2018 (ICPER 2018) at Kuala Lumpur, Malaysia, 13 - 14 August 2018), AIP Conference Proceedings, 2018, 2035, 060005.
53 "Performance Analysis of Grooved Hydrodynamic Journal Bearing With Multi-Depth Textured Surface" (3rd International Conference on Mechanical, Manufacturing and Process Plant Engineering Batu Ferringhi Beach, Penang, Malaysia, 22nd–23rd November 2017), International Journal of Vehicle Structures and Systems, 2018, Vol. 10, No 2, http://dx.doi.org/10.4273/ijvss.10.2.13.
54 "An In- Depth Review on Direct Additive Manufacturing of Metals" (3rd International Conference on Mechanical, Manufacturing and Process Plant Engineering Batu Ferringhi Beach, Penang, Malaysia, 22nd–23rd November 2017), IOP Conf. Series: Materials Science and Engineering,2018,328,012005.
55 “Performance Analysis of Long Grooved Journal Bearing with Slip, No-Slip, and Slip/No-Slip Textured Surface Configurations” (2nd International Conference on Mechanical, Manufacturing and ProcessPlant Engineering (ICMMPE 2016) at Kuala Lumpur, Malaysia, 23– 24 November 2016), ARPN Journal of Engineering and Applied Sciences,2017, Vol. 12,No. 20, pp. 5794- 5798.
56 “Early Mobilization using Heat treated Shape Memory Alloy (SMA) for Rehabilitation Phases,” (2016 International Conference on Smart Materials Technologies (ICSMT 2016) at Moscow, Russia, 18-20 May 2016), Key Engineering Materials, Vol. 724, 2017, pp. 112-116.
57 “Inverse Kinematics - Stewart Platform Actuated by Shape Memory Alloy for Immobilization of Ankle-Foot Rehabilitation,” (2016 International Conference on Smart Materials Technologies (ICSMT 2016) at Moscow, Russia, 18-20 May 2016), Key Engineering Materials, Vol. 724, 2017, pp. 105-111.
58 “Load Capacity Coefficient Evaluation of Three-layered Journal Bearing,” Jurnal Teknologi, Vol. 78, No. 6–10, 2016, pp 39–43.
59 “Optimally Tuned Active Damped Dynamic Vibration Absorber” (5th International Conference on Production, Energy and Reliability 2016 (ICPER 2016) at Kuala Lumpur, Malaysia, 15–17 August 2016),ARPN Journal of Engineering and Applied Sciences,Vol. 11,No. 22, 2016, pp. 13380-13383.
60 “An Analytical Investigation of the Grooved Journal Bearing's Performance with Slip/No-Slip Texture Bearing” (5th International Conference on Production, Energy and Reliability 2016 (ICPER 2016) at Kuala Lumpur, Malaysia, 15 - 17 August 2016), ARPN Journal of Engineering and Applied Sciences,Vol. 11,No. 22, 2016, pp. 12990-12993.
61 “An Analytical Approach to Investigate the Effect of Grooved Surface on Short Journal Bearing's Performance” (5th International Conference on Production, Energy and Reliability 2016 (ICPER 2016) at Kuala Lumpur, Malaysia, 15 - 17 August 2016), ARPN Journal of Engineering and Applied Sciences,Vol. 11,No. 20, 2016, pp. 12045-12049.
62 “Microstructure Based Finite Element Analysis for Deformation Behaviour of Magnesium Based Composites” (5th International Conference on Production, Energy and Reliability 2016 (ICPER 2016) at Kuala Lumpur, Malaysia, 15 - 17 August 2016), ARPN Journal of Engineering and Applied Sciences,Vol. 11,No. 22, 2016, pp. 12967-12972.
63 “Application of Nano Aluminum in Modified EDM: PMEDM” (5th International Conference on Production, Energy and Reliability 2016 (ICPER 2016) at Kuala Lumpur, Malaysia, 15 - 17 August 2016), ARPN Journal of Engineering and Applied Sciences,Vol. 11,No. 20, 2016, pp. 12117-12121.
64 “Electrical Discharge Machining on Biodegradable AZ31 Magnesium Alloy using Taguchi method” Procedia Engineering (4th International Conference on Process Engineering and Advanced Materials 2016 (ICPEAM 2016) at Kuala Lumpur, Malaysia, 15–17 August 2016), Vol. 148, 2016, pp 916-922.
65 “Analysis of Porous Layered Journal Bearing Lubricated with Ferrofluid”, (7thInternational Meeting on Advances in Thermofluids (IMAT 2014), at Kuala Lumpur,Malaysia, 26-27 November, 2014), Applied Mechanics and Materials,Vol. 819, 2016, pp 474-478.
66 “Effect of Additive Volume Fraction on a Fluid Film Pressure and Load of Hydrodynamic Journal Bearing using Ferromagnetic Fluid” ARPN Journal of Engineering and Applied Sciences (International Conference on Mechanical, Manufacturing and Process Plant Engineering (ICMMPE 2015) at Kuala Lumpur, Malaysia, 24 - 26 November 2015), Vol. 11, No. 6, 2016, pp. 4203-4207.
67 “Effect of Surface Texturing on Hydrodynamic Performance of Journal Bearings” ARPN Journal of Engineering and Applied Sciences (International Conference on Mechanical, Manufacturing and ProcessPlant Engineering (ICMMPE 2015) at Kuala Lumpur, Malaysia, 24 - 26 November 2015), Vol. 11, No. 1, 2016, pp 172-176.
68 “Analysis of CNT Additives in Porous Layered Thin Film Lubrication with Electric Double Layer”, (23rd Scientific Conference of the Microscopy Society Malaysia 2014 (SCMSM 2014), at UTP, Malaysia, 10-12 December 2014), AIP Conf. Proc., 2015, 1669, 020034.
69 “A Novel Approach of using SMA Wires Actuated Stewart Platform for Continuous Passive Motion (CPM) of Ankle Rehabilitation Therapy” (2nd International Materials, Industrial, and Manufacturing Engineering Conference (MIMEC2015), at Bali, Indonesia, 4 – 6 February 2015), Advanced Materials Research, Vol. 1125, 2015, pp 494-498.
70 “Analysis of the Stability of Elliptical Journal Bearings Under Vapor Cavitation Erosion”, (6th International Conference on Mechanical, Industrial, and Manufacturing Technologies, at Melaka, Malaysia, 6-7 March 2015), Applied Mechanics and Materials,Vols. 789-790, 2015, pp 239-243.
71 “Overcoming Limitation in DFM using Layer Manufacturing”, (5th International Conference on Mechanical and Manufacturing Engineering (ICME 2014), at Bandung, Indonesia, 29-30 October 2004), Applied Mechanics and Materials, Vol. 660, 2014, pp 94-98.
72 “Comparative study between programming systems for Incremental Sheet Forming process”, (2014 4thInternational Conference on Production Energy and Reliability, at Kuala Lumpur, Malaysia, 3-5 June, 2014), MATEC Web of Conferences, Vol. 13, 2014, pp. 04009.
73 “Evaluation of Spur Gear Pair on Tooth Root Bending Stress in Radial Misalignment Contact Condition”,(2014 4thInternational Conference on Production Energy and Reliability, at Kuala Lumpur, Malaysia, 3-5 June, 2014), MATEC Web of Conferences, Vol. 13, 2014, pp. 04010.
74 “Pressure Distribution in a Journal Bearing Lubricated with Additives”, (2014 4thInternational Conference on Production Energy and Reliability, at Kuala Lumpur, Malaysia, 3-5 June, 2014), MATEC Web of Conferences, Vol. 13, 2014, pp. 05006.
75 “Nonlinear Analysis of Spur Gear Pair with Time Varying Mesh Stiffness”, (2014 4thInternational Conference on Production Energy and Reliability, at Kuala Lumpur, Malaysia, 3-5 June, 2014), MATEC Web of Conferences, Vol. 13, 2014, pp. 04032.
76 “Analysis of Two-Layered Journal Bearing Lubricated with Ferrofluid”, (2014 4thInternational Conference on Production Energy and Reliability, at Kuala Lumpur, Malaysia, 3-5 June, 2014), MATEC Web of Conferences, Vol. 13, 2014, pp. 04031.
77 “Improving Rate of Penetration for PDC Drill Bit using Reverse Engineering”, (2014 3rd International Conference on Machine Design and Manufacturing Engineering(3rd ICMDME 2014)atJeju Island, South Korea, May.24-25, 2014), Applied Mechanics and Materials, Vol. 607, 2014, pp. 153-160.
78 “Evaluation of Spur Gear Pair on Tooth Root Bending Stress in Yawing Misalignment Contact Condition”, (2014 5th International Conference on Manufacturing Science and Technology at Miri, Sarawak, Malaysia, 7-8, June, 2014), Advanced Materials Research, Vol. 980, 2014, pp. 97-101.
79 “Analysis of Two-Layered Film Journal Bearing with Partial Slip Surface”, (International Manufacturing Engineering Conference (iMEC) 2013, at Gambang, Kuantan, Malaysia, July 1-3, 2013), Advanced Materials Research, Vol. 903, 2014, pp. 215- 220.
80 “Influence of Workpiece Shape on MRR and EWR in EDM of steel”, (International Manufacturing Engineering Conference (iMEC) 2013, at Kuantan, Malaysia, July 1-3, 2013), Advanced Materials Research, Vol. 903, 2014, pp. 51-55.
81 “Analysis of Electric Double Layer on Thin Film Lubrication with Partial Slip”, (BOND21, Joint International Conference on Nanoscience, Engineering, and Management, at Penang, Malaysia, 19 - 21August, 2013), Advanced Materials Research, Vol. 925, 2014, pp. 538-542.
82 “Meshless Local B-spline Basis Functions-FD Method and its Application for Heat Conduction Problem with Spatially Varying Heat Generation”, (4thInternational Conference on Mechanical and Manufacturing Engineering, at Bangi-Putrajaya, Malaysia, 17-19December, 2013), Applied Mechanics and Materials, Vol. 465, 2014, pp. 490-495.
83 “Load Capacity of Partially Textured Slip Parallel Slider and Concentric Journal Bearing Using Narrow Groove Theory”, (The Malaysia International Tribology Conference (MITC) 2013, at Kota Kinabalu, Malaysia, November 18-20, 2013), Procedia Engineering, Vol. 68, 2013, pp. 63-69.
84 “Analysis of Couple Stress Fluid Lubricated Journal Bearing with Partial Slip Surface”, 2013 IEEE Business Engineering & Industrial Applications Colloquium (BEIAC), at Langkawi, Malaysia, April 7-9, 2013, pp. 807-811.
85 “A Numerical FEM Solution of Gear Root Stress in Offset Axial Mesh Misalignment”, (International Conference on Advances in Mechanical Engineering (ICAME) 2013, at Malacca, Malaysia, 28-29August, 2013), Applied Mechanics and Materials, Vol. 393, 2013, pp. 375-380.
86 “Analysis of Nanoparticle Additive Couple Stress Fluids in Three-layered Journal Bearing”, (The 3rd ISESCO International Workshop and Conference on Nanotechnology (IWCN 2012), at UKM, Bangi, Malaysia, 5 - 7 December, 2012), Journal of Physics: Conference Series, Vol. 431 (1), 2013, pp. 012023.
87 “Load Capacity of Partially Textured Journal Bearing with Trapezoidal Recess”, (3rd International Conference on Mechanical and Manufacturing Engineering, at UTHM, Batu Pahat, Malaysia, 20-21 November, 2012), Applied Mechanics and Materials,Vol. 315, 2013, pp. 830-834.
88 “Experimental Investigation - Natural Fiber Braided Sleeve for Pneumatic Artificial Muscles (PAMs) Actuation”, (3rd International Conference on Production Energy and Reliability, at Kuala Lumpur, Malaysia, 12-14 June, 2012), Asian Journal of Scientific Research,Vol. 6, No. 3, 2013, pp. 596-602.
89 “Analysis of Journal Bearing Considering the Effects of Surface Layer and Couple Stress Fluids”, (3rd International Conference on Production Energy and Reliability, at Kuala Lumpur, Malaysia, 12-14 June, 2012), Asian Journal of Scientific Research, Vol. 6, No. 2, 2013, pp. 315-322.
90 “Analysis of Two-layered Porous Journal Bearing Using the Brinkman Model”, (3rd International Conference on Production Energy and Reliability, at Kuala Lumpur, Malaysia, 12-14 June, 2012), Journal of Applied Sciences, Vol. 12, No. 24, 2012, pp. 2610- 2615.
91 “Silk Pneumatic Artificial Muscle (SPAM) Construction for Bio-medical Engineering Application”, 2012 IEEE Business Engineering & Industrial Applications Colloquium (BEIAC), at Kuala Lumpur, Malaysia, April 7-8, 2012, pp. 302-306.
92 “The Stress Distribution of Gear Tooth Due to Axial Misalignment Condition”, (3rd International Conference on Production Energy and Reliability, at Kuala Lumpur, Malaysia, 12-14 June, 2012), Journal of Applied Sciences, Vol. 12, No. 23, 2012, pp. 2404-2410.
93 “Partially Textured Slider and Journal Bearing Analysis”, Jurnal Teknologi (Science and Engineering), Vol. 58, 2012, pp. 77-84.
94 “Analysis of Partially Textured Slider and Journal Bearing”, (4th International Meeting of Advances in Thermofluids (IMAT) 2011, at Melaka, Malaysia, October 3-4, 2011), AIP Conf. Proc. 2012, 1440, 273.
95 “Integration of lean and green supply chain-Impact on manufacturing firms in improving environmental efficiencies”, (International Conference on Green technology and environmental Conservation (GTEC-2011), at Chennai, India, December 15-17, 2011), IEEE Conf. Proc., 143-147 (2011).
96 “Optimal batch size in a single-stage and optimal number of kanbans in a multi-stage JIT production-delivery system with rework consideration”, International Journal of Logistics Systems and Management, Vol. 7, No. 1, 2010, pp. 56 – 80.
97 “Optimal batch sizing, quality improvement and rework for an imperfect production system with inspection and restoration”,European Journal of Industrial Engineering, Vol. 3, No. 3, 2009, pp. 305 – 335.
98 “A JIT integrated inventory model for a buyer and a vendor considering the impact of quality improvement”, International Journal of Manufacturing Technology and Management, Vol. 18, No. 2, 2009, pp. 210 – 227.
99 “An integrated approach to design and analysis of lean manufacturing system: a perspective of lean supply chain”,International Journal of Services and Operations Management, Vol. 5, No. 2, 2009, pp. 175 – 208.
100 “The value of setup cost reduction and quality improvement on the optimal production run length and inspection schedules in a deteriorating production process”, International Journal of Enterprise Network Management, Vol. 3, No. 1, 2009, pp. 1 – 22.
101 “Optimal cycle length and number of inspections in an imperfect production processes with investment on setup cost reduction and quality improvement”,International Journal of Manufacturing Research, Vol. 4, No. 1, 2009, pp. 17 – 36.
102 “Managing quality improvement, setup cost and lead time reductions in a just-in-time integrated inventory model”, International Journal of Information Systems and Change Management, Vol. 3, No. 2, 2008, pp. 147 – 156.
103 “Pricing, Investment and Order Quantity Decisions in Collaboration between a Manufacturer and a Retailer”, International Journal of Business Innovation and Research, Vol. 2, No. 2, 2008, pp. 141 – 176.
104 Effect Of Size And Geometry of Polycrystalline Diamond Cutter (PCD) on Wear Rate in Multilayer Formation, Science International, Vol. 29, No. 3,2017, pp. 529-534.
105 “Ferrofluid Lubricated Partial Porous Layered Journal Bearing Analysis”, Jurnal Mekanikal, Vol 38, 2015, pp 1-6.
106 “Analysis of Grooved Journal Bearing With Partial Slip Surface”, (Regional Tribology Conference 2011, at Langkawi, Malaysia, November 22-24, 2011), Engineering e-Transactions, Vol. 6, No. 2, 2011, pp. 183-190.
107 “Derivation of nonlinear coefficients in multi lobe journal bearings,” Applied Mechanics and Engineering, (Poland), Vol. 4, 1999, pp. 57-66.
108 "An Overview of Aluminum Metal Matrix Composites for Automobile Applications", 7th Mechanical Engineering Research Day (MERD'20), Universiti Teknikal Malaysia Melaka (UTeM), Melaka, 16 December 2020.
109 “Thin Composite Film Lubrication Analysis of Slider Bearing Considering the Effects of Electric Double Layer and Partial Slip Texture”, China International Symposium on Tribology, Chengdu, China, 15-18 September, 2020, To be Submitted.
110 “Analysis of Partial Slip Texture Geometries in Slider and Journal Bearing using Gauss Quadrature Method”, MITC 2020: The 3rd Malaysian International Tribology Conference, in Langkawi, Kedah, Malaysia, 5-7 July 2021, Accepted.
111 “Analysis of Optimally Tuned Active Dynamic Vibration Absorber” (International Conference on Production, Energy and Reliability 2020 (ICPER2020), Borneo Convention Centre Kuching, Sarawak from 14-16 July 2020), Accepted.
112 “Stewart Platform Actuated by Shape Memory Alloy (NiTi) – Force Analysis” (International Conference on Production, Energy and Reliability 2020 (ICPER 2020), Borneo Convention Centre Kuching, Sarawak from 14-16 July 2020), Accepted.
113 “Load Capacity of Recess Foil Journal Bearing”,Virtual International Conference on Emerging Trends in Engineering & Technology (IConETech- 2020), University of the West Indies, St. Augustine, Trinidad, June 1 - 5, 2020.
114 "Analysis of limiting load capacity of porous foil journal bearing", Research Day 2020, SRMIST, Kattankulathur, February 28, 2020.
115 “Analysis of Load Capacity of Texture Foil Journal Bearing” IndiaTrib-2019, 10th International Conference on Industrial Tribology, IISc, Bangalore, India, 1-4 December 2019.
116 “Analysis of Cracked Rotor with Gyroscopic Effects supported on Textured Journal Bearings” Proceedings of the ASME 2019 Gas Turbine India Conference. Volume 1: Compressors, Fans, and Pumps; Turbines; Heat Transfer; Structures and Dynamics. Chennai, Tamil Nadu, India. December 5–6, 2019. V001T05A001. ASME.
117 “Analysis of Cracked Rotor supported on Porous Layered Journal Bearing with Gyroscopic Effects” 1st International Conference on Mechanical Power Transmission (ICMPT 2019), IIT Madras, Chennai, 11 - 13 July 2019.
118 “Research on Surface Texturing in Malaysia for Tribological Applications: An Overview” (3rd MYTRIBOS Symposium, School of Manufacturing UniMAP, Arau, Perlis, 29 April 2019), 3, 24-27.
119 “Wear and Mechanical properties of Magnesium composite (AZ63/SiC) fabricated by powder metallurgy” International Conference on Mechanical & Building Sciences 2019, SNS College of Technology, Coimbatore, India, March 27-28, 2019.
120 “Analysis of magnetohydrodynamic partial slip texture slider and journal bearing”, Proceedings of Asia International Conference on Tribology 2018 (6th Asia International Conference on Tribology, Kuching, Malaysia, 17-20 September 2018), Malaysian Tribology Society, pp. 90-91.
121 “Analysis of Partial Slip Step-Texture Journal Bearing,” National Tribology Conference 2016, at IIT (BHU) Varanasi, India, 8 - 10 December 2016.
122 “Stability Evaluation of Three-layered Journal Bearing with Slip” Proceedings of International Conference on Advanced Processes and Systems in Manufacturing (APSIM 2016 at Putrajaya, Malaysia, 28-30 August 2016), Malaysian Tribology Society, pp. 99-100, 2016.
123 “Stability of Double Porous and Surface Porous Layer Journal Bearing,” (Malaysian International Tribology Conference 2015, at Penang, Malaysia, 16-17 November 2015), Proceedings of Malaysian International Tribology Conference, 2015, 36-37.
124 “Static deflection Analysis of Stewart platform Actuated by Shape Memory Alloy (SMA)” Global Conference on Engineering and Technology on: Professional Breadth and Technical Depth – Cultivating the T-Shaped Engineer (PBTDTE-2016), at Kuala Lumpur, Malaysia, 1-2 June 2016.
125 “Stability Analysis of Journal Bearing with Three-layered Lubricant Film,” 5th International Conference on Noise, Vibration and Comfort (NVC) 2015, at Melaka, Malaysia, 1 – 3 December 2015.
126 “Analysis of Nanoparticle Additive Three-layered Journal Bearing”, International Conference on Nanotechnology (ICONT) 2012, at Kuantan, Malaysia, 30 May - 1 June, 2012.
127 “Stability analysis of floating bush ball bearing (FBBB)”, TRIBO-INDIA Conference on Tribology of Automotive Systems, at IIT Delhi, New Delhi, December 11-12, 2009.
128 “Hopf bifurcation analysis of short journal bearings considering turbulent effects,” IUROTOR-2009, IUTAM Symposium on Emerging Trends in Rotordynamics held at IIT Delhi, New Delhi, PS-2, Abs-13, March 23-26, 2009.
129 “Limiting Stiffness and Damping Coefficients of Foil Bearing,” Proceedings of IDETC/CIE 2005 ASME 2005 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, September 24 – 28, 2005, California, USA.
130 “Stability Analysis of Vertical Rotor With External Stiffness and Damping Supported on Journal Bearings,” ISCORMA-3, 19 – 23 September 2005, Cleaveland, USA.
131 “Stability and Unbalance Response of Rotor Bearing System,” NaCoMM 2003 – 11th National Conference on Machines and Mechanisms, IIT Delhi, December 18 – 19, 2003, Session 19IB, pp. 365 – 371.
132 “Optimization of Journal Bearing Groove Geometry using Genetic Algorithm,” NaCoMM 2003 – 11th National Conference on Machines and Mechanisms, IIT Delhi, December 18 – 19, 2003, Session 19IIIA, pp. 667 – 673.
133 “Static Analysis of the Hard Disk Air Bearing Slider Using Slip Flow Theory,” ICIT 01, International conference on Industrial Tribology, Jamshedpur (8th – 11th April , 2002), pp. 9.29 – 9.36.
134 “A methodology to evaluate nonlinear dynamic coefficients in a hydrodynamic journal bearings,” ICIT 99, International conference on Industrial Tribology, Hyderabad, pp. 154 – 161.
135 “Experimental determination of dynamic characteristics of a hydrodynamic journal bearing,” NACOMM 99, National conference on machines and mechanisms held at IIT Bombay, Mumbai, pp. 167-179.
136 “Bearing design performance evaluation of a reciprocating compressor,” Proc. Of 11th ISME conference, Indian society of mechanical engineers, 1999, pp. 191-196, New Delhi.
137 “An analytical approach for journal bearing design,” Proc. Of ICIT 97, International conference on Industrial Tribology, Advances in Industrial Tribology, 1997, pp. 172- 178, Calcutta.
138 “An analytical evaluation of maximum pressure for a journal bearing,” NACOMM 97, National conference on machines and mechanisms, 1997, pp. B 27-31, Kanpur.
139 “Energy conservation by selecting a proper bearing,” Proc. Of NETCE, National Conference on Emerging Trends in Clean Environment, 1993, Hyderabad.

    Books

  • Kumar Katiyar, P Ramkumar, T V V L N Rao, J. Paulo Davim (Editors) “Tribology in Materials and Applications” Materials Forming, Machining and TribologySeries (Series Editor Prof. J. Paulo Davim), Springer International Publishing, 2020.
  • T V V L N Rao, Salmiah Kasolang, Guoxin Xie, Jitendra Kumar Katiyar, Ahmad Majdi Abdul Rani (Editors) “Biotribology: Emerging Technologies and Applications”, Emerging Materials and Technologies Series (Series Editor Prof. Boris I. Kharissov), CRC Press (Taylor & Francis), Oct 2021.
  • T V V L N Rao, Salmiah Kasolang, Guoxin Xie, Jitendra Kumar Katiyar, Ahmad Majdi Abdul Rani (Editors) “Green Tribology: Emerging Technologies and Applications”, Emerging Materials and Technologies Series (Series Editor Prof. Boris I. Kharissov), CRC Press (Taylor & Francis), Oct 2021.
  • Jitendra Kumar Katiyar, T V V L N Rao, Alessandro Ruggiero, J. Paulo Davim (Editors) “Industrial Tribology: Spotlight in Future”, Manufacturing Design and Technology, (Series Editor Prof. J. Paulo Davim), CRC Press (Taylor & Francis), Accepted.
  • Book Chapters

  • T. V. V. L. N. Rao, Ahmad Majdi Abdul Rani, Norani Muti Mohamed, Hamdan Haji Ya, Mokhtar Awang, Fakhruldin Mohd Hashim, “Analysis of Partial Texture Multi-lobe Journal Bearings” CRC Press (Taylor & Francis), (Tribology and Sustainability, Editors: Jitendra Kumar Katiyar, Mir Irfan Ul Haq, Ankush Raina, R Arvind Singh, S Jayalakshmi), To be communicated.
  • T. V. V. L. N. Rao, Ahmad Majdi Abdul Rani, Mokhtar Awang, Masri Baharom, Yoshimitsu Uemura “Biolubricants with Additives in Malaysia for Tribological Applications” Springer-Nature(Handbook of Nanomaterials and Nanocomposites for Energy and Environmental Applications, Editors: Oxana Vasilievna Kharissova, Leticia Myriam Torres Martínez, Boris Ildusovich Kharisov), https://doi.org/10.1007/978-3- 030-11155-7_6-1, 2020.
  • Krishnan Subramaniam, Ananda krishna, Amer Nordin, Victor Amirtham, A.M.A Rani, T V V L N Rao “Design and Fabrication of a Parallel Mechanism for Foot/Ankle Rehabilitation Therapy”, (Advancement in Emerging Technologies and Engineering Applications, Editors: Saw, C.L., Woo, T.K., Salvinder Singh, K.S., Asmara Bin Salim, D., Presented at 2nd Regional Conference on Mechanical and Marine Engineering (ReMME’18) at Ipoh, Malaysia, 7th-9th November 2018), Lecture Notes in Mechanical Engineering, Springer, pp. 133-141, 2020.
  • T. V. V. L. N. Rao, Ahmad Majdi Abdul Rani, Norani Muti Mohamed, Hamdan Haji Ya, Mokhtar Awang and Fakhruldin Mohd Hashim “Stability Analysis of Partial Slip Texture Journal Bearing” Springer-Nature (6th National Symposium on Rotor Dynamics (NSRD 2019), CSIR-NAL, Bengaluru, July 2-3, 2019), 2020.
  • Shravankumar Chandrasekaran, Jegadeesan K and T. V. V. L. N. Rao “Analysis of Rotor supported in Double porous Layered Journal Bearing with Gyroscopic Effects” Springer-Nature (6th National Symposium on Rotor Dynamics (NSRD 2019), CSIR-NAL, Bengaluru, July 2-3, 2019), 2020.
  • Shravankumar Chandrasekaran, Jegadeesan K and T. V. V. L. N. Rao “Analysis of Rotor with Gyroscopic Effects supported on Surface Porous Layered Journal Bearing” Springer Applied Sciences (Tribology in Materials and Applications, Editors: Jitendra Kumar Katiyar, P Ramkumar, T V V L N Rao, J. Paulo Davim), pp. 261-277, 2020.
  • T. V. V. L. N. Rao, Ahmad Majdi Abdul Rani, Norani Muti Mohamed, Hamdan Haji Ya, Mokhtar Awang, Fakhruldin Mohd Hashim “Analysis of Partial Texture Journal Bearing Lubricated using Micropolar and Power-law Fluids” Springer Applied Sciences (Tribology in Materials and Applications, Editors: Jitendra Kumar Katiyar, P Ramkumar, T V V L N Rao, J. Paulo Davim), pp. 211-225, 2020.
  • Muhammad Nurshafiq Ramli, Ahmad Majdi Abdul Rani, Nabihah Sallih, Abdul Azeez Abdu Aliyu, T V V L N Rao, Vibration Analysis Methods for Misalignment and Tolerance Problems in Machine Systems: A Review, In: Awang M., Emamian S., Yusof F. (eds) Advances in Material Sciences and Engineering. Lecture Notes in Mechanical Engineering. Springer, Singapore, pp. 57-66, 2020.
  • T V V L N Rao, Ahmad Majdi Abdul Rani and Geetha Manivasagam “Squeeze Film Bearing Characteristics for Synovial Joint Applications” In: Bains P., Sidhu S., Bahraminasab M., Prakash C. (eds) Biomaterials in Orthopaedics and Bone Regeneration. Materials Horizons: From Nature to Nanomaterials, Springer, Singapore, pp. 55-72, 2019.
  • Abdul’Azeez Abdu Aliyu, Ahmad Majdi Abdul-Rani, Turnad Lenggo Ginta, Chander Prakash, T. V. V. L. N. Rao, Eugen Axinte and Sadaqat Ali “Synthesis and characterization of bioceramic oxide coating on Zr-Ti- Cu-Ni-Be BMG by electro discharge process” (Manufacturing 2019, Poznan University of Technology, Poznan, Poland, May 19-22, 2019), Springer Nature Switzerland (Advances in Manufacturing II, Eds.: B. Gapiński et al.), Vol. 4, , pp. 518–531, 2019.
  • Sadaqat Ali, Ahmad Majdi Abdul Rani, Khurram Altaf, Patthi Hussain, Chander Prakash, Sri Hastuty, T. V. V. L. N. Rao, Abdul’Azeez Abdu Aliyu and Krishnan Subramaniam “Investigation of alloy composition and sintering parameters on the corrosion resistance and microhardness of 316L stainless steel alloy” (Manufacturing 2019, Poznan University of Technology, Poznan, Poland, May 19-22, 2019), In book: Energy Transfer and Dissipation in Plasma Turbulence, DOI: 10.1007/978-3-030-16943-5_45.
  • T V V L N Rao, A M A Rani,S. Sufian, N. M. Mohamed“Thin Film Hydrodynamic Bearing Analysis Using Nanoparticle Additive Lubricants” Springer International Publishing (Engineering Applications of Nanotechnology, Editors: Viswanatha Sharma Korada and Nor Hisham B. Hamid),pp. 149-173, 2017.